LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter (Regular Cab) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the coat hook. Refer to Coat Hook Replacement  .
  2. Remove the jack and tool stowage.
  3. Remove the rear window lower molding. Refer to Molding Replacement - Rear Window Lower  .
  4. Remove the quarter panel trim screws.
  5. Remove the rear screw from the sill trim plate.
  6. Remove the quarter panel.
    7. Fig 1: Removing Rear Quarter Trim Panel (Regular Cab)
    GM348549Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals