LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Interior Trim) >> Repair Instructions >> Molding Replacement - Rear Window Lower >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lightly pull the lower edge of the molding in order to release the clips. On extended cab fold the rear bench seat up. This will move the assembly forward so that the molding can be accessed.
  2. Lift the molding up and away from the glass in order to release the upper retainers.
    3. Fig 1: Removing Lower Window Lower Molding
    GM348735Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals