LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Interior Trim) >> Repair Instructions >> Molding Replacement - Rear Window Lower >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Lower Window Lower Molding
    GM348735Courtesy of GENERAL MOTORS CORP.
  1. Align the molding clips with the holes in the body panel along the back glass.
  2. Snap the molding into place.
scientia non olet · About LEMON Manuals