Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the I/P top trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages, and Console.
- Remove the hinge pillar trim. Refer to Trim Panel Replacement - Hinge Pillar .
- Disconnect the headliner wire connectors from the junction block located next to the clutch or brake pedal.
- Remove the wire harness retainers along the windshield pillar and I/P assembly.
- Remove the rear quarter trim panels, if necessary. Refer to Trim Panel Replacement - Rear Quarter (Regular Cab) , Trim Panel Replacement - Rear Quarter (Extended Cab) or Trim Panel Replacement - Rear Quarter (Crew Cab) .
- Remove the overhead console, if equipped. Refer to Console Replacement - Overhead .
- Remove the DVD player, if equipped. Refer to DVD Player Replacement (2nd Row) in Entertainment.
- Remove both front sunshades. Refer to Sunshade Replacement .
- Remove the rear coat hook, if equipped. Refer to Coat Hook Replacement .
- Remove the interior dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.
- Remove the assist handles, if equipped. Refer to Assist Handle Replacement - Front .
- Disengaging the front of the headliner from the roof.
- If replacing the crew cab headliner, remove the rear window from the vehicle. Refer to Rear Window Replacement (Pickup) in Stationary Windows.
- Remove the headliner from the vehicle by grasping the headliner on the left and the right sides near the front of the cab.