LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure the bottom of the molding is seated in the slots on the I/P.
  2. Align the molding retainers to the slots.
  3. Press the moldings straight in till fully seated.
    4. Fig 1: Installing Windshield Pillar Garnish Molding
    GM346858Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals