LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Center Pillar >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door sill plates. Refer to Door Sill Plate Replacement - Front  or Door Sill Plate Replacement - Rear  .
  2. Remove the pillar moldings by holding the moldings firmly while pulling out.
    3. Fig 1: Removing Center Pillar Garnish Molding
    GM521849Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals