LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Center Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pillar moldings by pushing until the molding locks into place.
  2. Install the door sill trim plates. Refer to Door Sill Plate Replacement - Front  or Door Sill Plate Replacement - Rear  .
  3. Fig 1: Installing Center Pillar Garnish Molding
    GM521849Courtesy of GENERAL MOTORS CORP.