LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Interior Trim) >> Repair Instructions >> Carpet Replacement - Front (With HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hinge pillar trim panel. Refer to Trim Panel Replacement - Hinge Pillar  .
  2. Remove the door sill plates. Refer to Door Sill Plate Replacement - Front  or Door Sill Plate Replacement - Rear  .
  3. Remove the front seats. Refer to Seat Replacement - Front Bucket in Seats.
  4. Remove the floor console. Refer to Console Replacement (w/Console Mounting Bracket) or Console Replacement (w/o Console Mounting Bracket) .
  5. Remove the center seat, if equipped. Refer to Seat Replacement - Center in Seats.
  6. Remove the rear seat. Refer to Seat Replacement - Rear (Extended Cab w/4th Door) , Seat Replacement - Rear (Extended Cab) or Seat Replacement - Rear (60/40 Split) in Seats.
  7. Remove the jack assembly.
  8. Remove the energy storage box. Refer to Energy Storage Box (ESB) Carrier Replacement (5.3L Engine w/RPO HP2) in Engine Electrical.
  9. Remove the quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter (Regular Cab)  , Trim Panel Replacement - Rear Quarter (Extended Cab)  or Trim Panel Replacement - Rear Quarter (Crew Cab)  .
  10. Remove the lower bolt from the instrument panel (I/P) support post. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages and Console.
  11. Remove the carpet from the vehicle.
  12. Fig 1: Front Carpet (With HP2)
    GM276934Courtesy of GENERAL MOTORS CORP.