LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Storage Compartment Replacement - Console End Panel >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the storage compartment until the locking tabs are fully seated.
    2. Fig 1: Storage Compartment Locking Tabs
    GM824847Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 2 retaining bolts (1).

    Tighten:  Tighten the 2 bolts to 1.6 N.m (14 lb in).

    3. Fig 2: Installing Storage Compartment Retaining Bolts
    GM824835Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals