LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P cluster trim plate bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
    2. Fig 1: Removing End Panel
    GM348724Courtesy of GENERAL MOTORS CORP.
  2. Remove the knee bolster screws.
  3. Unsnap the top of the knee bolster from the I/P assembly.
    4. Fig 2: Removing Knee Bolster
    GM348714Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals