LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel (I/P) Trim Panel Replacement - Lower >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect all of the electrical connectors (1, 2, 3).
    2. Fig 1: Connecting Lower I/P Trim Panel Electrical Connectors
    GM375028Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts connecting the lower trim panel to the I/P assembly.

    Tighten:  Tighten the bolts to 2 N.m (18 lb in).

    3. Fig 2: Installing Lower I/P Trim Panel
    GM348701Courtesy of GENERAL MOTORS CORP.
  3. Install the center console, if equipped. Refer to Console Replacement (w/Console Mounting Bracket)  or Console Replacement (w/o Console Mounting Bracket) .
  4. Install the I/P cluster trim bezel. Refer to Instrument Panel Cluster (IPC) Replacement .
scientia non olet · About LEMON Manuals