LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Cupholder Replacement (Rear) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install one of the hinge in the opening in the panel.
    2. Fig 1: Cupholder Screws (Rear)
    GM882669Courtesy of GENERAL MOTORS CORP.
  2. Swing the cupholder assembly so that the other hinge can be installed in the other opening.
  3. Inspect for correct operation.
scientia non olet · About LEMON Manuals