LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake to prevent the vehicle from moving.
  2. If equipped with an automatic transmission, move the shift lever all the way down to last gear.
  3. Tilt the steering wheel to the full down position.
  4. Pull gently rearward on the corners of the bezel from the instrument panel (IP) assembly.
    5. Fig 1: Removing I/P Bezel
    GM348730Courtesy of GENERAL MOTORS CORP.
  5. Remove the bezel.
scientia non olet · About LEMON Manuals