LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the bezel to the IP assembly.
  2. Attach the bezel to the IP assembly by pushing gently on the bezel till it is in place.
    3. Fig 1: Installing I/P Bezel
    GM348730Courtesy of GENERAL MOTORS CORP.
  3. Ensure all clips are in place.
  4. Tilt the steering wheel to the normal drive position.
  5. If equipped with an automatic transmission, move the shift lever to the park position.
  6. Disengage the parking brake.
scientia non olet · About LEMON Manuals