LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Bezel Replacement - Floor Console (Non-Luxury Lower) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
  2. Remove the upper bezel by inserting a flat bladed tool between the console and bezel.
    3. Fig 1: Floor Console Upper Bezel (Non-Luxury)
    GM882679Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connectors (1, 2).
    4. Fig 2: Floor Console Bezel Electrical Connectors (Non-Luxury)
    GM882681Courtesy of GENERAL MOTORS CORP.
  4. Remove the storage bin. Refer to Console Storage Bin Replacement (Expect Pro)  or Console Storage Bin Replacement (Pro) .
  5. Insert a flat bladed tool between the console and bezel in order to pry it out.
  6. Remove the bezel from the console.
    7. Fig 3: Floor Console Lower Bezel (Non-Luxury)
    GM882646Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals