LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Accessory Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors to the switches in the assembly
  2. Install the accessory switch assembly into the IP till it snaps into place.
    3. Fig 1: Installing Button Assembly
    GM658559Courtesy of GENERAL MOTORS CORP.
  3. Install the IP trim bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
scientia non olet · About LEMON Manuals