LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Door System, Mirror System & Window System) >> Repair Instructions >> Weatherstrip Replacement - Rear Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear door.
  2. Remove the rear door sill plate. Refer to Door Sill Plate Replacement - Rear in Interior Trim.
  3. Remove the center pillar molding. Refer to Garnish Molding Replacement - Center Pillar in Interior Trim.
  4. Remove the rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter (Regular Cab) or Trim Panel Replacement - Rear Quarter (Extended Cab) or Trim Panel Replacement - Rear Quarter (Crew Cab) in Interior Trim.
  5. Remove the weatherstrip (1) from the door opening flange.
    6. Fig 1: Removing Rear Door Weatherstrip
    GM1412702Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals