LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Door System, Mirror System & Window System) >> Repair Instructions >> Weatherstrip Replacement - Front Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the door.
  2. Remove the sill plate. Refer to Door Sill Plate Replacement - Front in Interior Trim.
  3. Remove the hinge pillar trim panel. Refer to Trim Panel Replacement - Hinge Pillar in Interior Trim.
  4. Remove the windshield pillar molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
  5. Remove the weatherstrip from the rear side door opening. Pull the unit away from channel, separating the weatherstrip from the pinchweld flange.
    6. Fig 1: Removing Front Door Weatherstrip
    GM373633Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals