LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Door System, Mirror System & Window System) >> Repair Instructions >> Door Handle Replacement - Inside >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trim panel. Refer to Trim Panel Replacement - Side Front Door (With YE9 Early Production)  or Trim Panel Replacement - Side Front Door (With YE9 Late Production) .
  2. Remove the inside door handle mounting bolts.
  3. Slide the inside door handle forward to release the unit from the door.
    4. Fig 1: Removing Inside Door Handle & Mounting Nuts
    GM348466Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the control rod from the inside door handle.
    5. Fig 2: View Of Control Rod To Inside Door Handle
    GM348468Courtesy of GENERAL MOTORS CORP.
  5. Remove the door handle assembly from the door.
scientia non olet · About LEMON Manuals