LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 954 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement (Pickup W/O Bumper) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb.
  2. Install the lens to the lamp assembly (2).
  3. Install the wiring (3) to the back of the lens assembly.
    4. Fig 1: Installing License Lamp (Pickup W/O Bumper)
    GM277232Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals