LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 953 (Horn System) >> Repair Instructions >> Horn Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the hood.
  2. Remove the battery. Refer to Battery Replacement in Engine Electrical.
  3. Remove the battery tray. Refer to Battery Tray Replacement in Engine Electrical.
  4. Remove the washer reservoir. Refer to Washer Pump/Reservoir Replacement in Wipers/Washer Systems.
  5. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  6. Disconnect the horn electrical connector.
  7. Remove the horn bolt. Reposition the park/turn signal lamp wiring harness for additional clearance.
  8. Remove the horn (2) from the radiator support (1).
    Fig 1: Horn & Radiator Support
    GM331104Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals