LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 952 (Stationary Window System) >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull back the front door sealing weatherstrip (1) to expose the windshield reveal molding screws.
    2. Fig 1: View Of Front Door Sealing Weatherstrip
    GM441415Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws from the windshield reveal molding.
    3. Fig 2: Identifying Windshield Reveal Molding Screws
    GM301107Courtesy of GENERAL MOTORS CORP.
  3. Remove the windshield reveal molding from the windshield pillar.
scientia non olet · About LEMON Manuals