LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 944 (Rear Drive Axle) >> Repair Instructions >> Differential Side Bearings Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the differential. Refer to Differential Replacement .
  2. Remove the differential side bearings by doing the following:
    1. 2.1. Install the J 22912-O1 onto the differential case.
    2. 2.2. Install the J 8107-2 onto the differential case bearing.
    3. 2.3. Remove the differential side bearings using the J 22912-O1 and a hydraulic press.
scientia non olet · About LEMON Manuals