LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 941 (Seat Belt System) >> Repair Instructions >> Seat Belt Replacement - Jumpseat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the jumpseat seat belt.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the jumpseat seat belt retaining bolt.

    Tighten 

    Tighten the jumpseat seat belt retaining bolt to 55 N.m (41 lb ft).

    Fig 1: Installing Jumpseat Seat Belt Retaining Bolt
    G01478451Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals