Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Fold the rear seats forward.
Lift the rear seat floor filler trim panels to access the center rear seat belt assembly.
Remove the center rear seat belt assembly retaining nuts from the vehicle.
Remove the center rear seat belt assembly from the vehicle.

Fig 1: Removing Center Rear Seat Belt Assembly (Utility)
Courtesy of GENERAL MOTORS CORP.