LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 940 (Body Rear End) >> Repair Instructions >> Pullstrap Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screw that retains the liftgate assist handle to the liftgate trim panel.
  2. Carefully pry at the edge of the liftgate assist handle in order to remove the liftgate assist handle from the liftgate trim panel.
    Fig 1: Liftgate Assist Handle
    G01478208Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals