LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 940 (Body Rear End) >> Repair Instructions >> Pressure Relief Valve Replacement (Pickup) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pressure relief ventilation valve into the assembly.

    Firmly press the valve into the rear of the cab.

  2. Install the pickup box. Refer to PICKUP BOX REPLACEMENT .
    Fig 1: Pressure Relief Valve
    G01478341Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals