LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 940 (Body Rear End) >> Repair Instructions >> Pickup Box Bedliner Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install tailgate liner.
    Fig 1: Tailgate Liner
    G01478307Courtesy of GENERAL MOTORS CORP.
  2. Install retainers.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the latch bolts.

    Tighten 

    Tighten the bolts to 25 N.m (18 lb ft).

  4. Place bedliner in truck box. Lift from one side and with the aid of an assistant slip the pickup box bedliner wall under the bedrail.
    Fig 2: Pickup Box Bedliner
    G01478308Courtesy of GENERAL MOTORS CORP.
  5. Install the retaining screws until fully seated but not stripped.
    Fig 3: Retaining Screws
    G01478309Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals