LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 940 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Lift Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate window latch support. Refer to LATCH SUPPORT REPLACEMENT - LIFT GATE WINDOW .
  2. Disconnect the electrical connectors, as needed.
  3. Remove the clip that retains the liftgate lock cylinder to the liftgate.
  4. Remove the liftgate lock cylinder from the liftgate.
    Fig 1: Removing Liftgate Lock Cylinder From Liftgate
    G01478249Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals