LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 940 (Body Rear End) >> Repair Instructions >> End Gate Adjustment >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the cargo net button.

    Tighten 

    Tighten the cargo net button to 2 N.m (18 lb in).

  2. Install the rubber bumper.
    Fig 1: Rubber Bumper
    G01478221Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals