LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 940 (Body Rear End) >> Repair Instructions >> Bed Rail Protector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the body plugs.
  2. Remove bolts.
  3. Remove bed rail protector.
  4. Remove bed rail protector gaskets.
    Fig 1: Bed Rail Protector Gaskets
    G01478310Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals