LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (HVAC Systems - Automatic) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the HVAC module assembly. Refer to HVAC MODULE ASSEMBLY REPLACEMENT in Heating, Ventilation and Air Conditioning.
  2. Remove the screws from the air inlet assembly.
  3. Remove the air inlet assembly.
    4. Fig 1: View Of HVAC Module
    GM651483Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the recirculation actuator electrical connector
  5. Remove the recirculation actuator screws.
  6. Remove the recirculation actuator.
scientia non olet · About LEMON Manuals