LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (HVAC Systems - Automatic) >> Repair Instructions >> Mode Actuator Replacement - Console >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removed Actuator Assembly
    GM284229Courtesy of GENERAL MOTORS CORP.
  1. Install the mode actuator.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws to the mode actuator.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  3. Install the air outlet duct to the console.
  4. Install the screw to the air outlet duct.

    Tighten:  Tighten the screw to 1.9 N.m (17 lb in).

  5. Install the console. Refer to CONSOLE REPLACEMENT in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals