LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Recline the driver seat rearward to access the left center trim pillar.
  1. Remove the upper portion of the left center trim pillar.
    2. Fig 1: Inside Air Temperature Sensor Assembly
    GM810247Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector.
  3. Remove the retaining clips from the B pillar.
  4. Remove the inside air temperature sensor assembly (1) from the B pillar.
scientia non olet · About LEMON Manuals