LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (HVAC Systems - Automatic) >> Repair Instructions >> Blower Motor Processor Replacement - Auxiliary >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT--REAR QUARTER--RIGHT (TRAILBLAZER, ENVOY, BRAVADA) or TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT (TRAILBLAZER EXT, ENVOY XL) in Interior Trim.
  2. Remove the HVAC module-auxiliary. Refer to HVAC MODULE REPLACEMENT - AUXILIARY in Heating, Ventilation and Air Conditioning.
  3. Disconnect the electrical connector from the blower motor processor.
  4. Remove the retaining screws from the blower motor processor (1).
    5. Fig 1: Blower Motor Control Processor-Auxiliary
    GM814581Courtesy of GENERAL MOTORS CORP.
  5. Remove the blower motor processor (3) from the HVAC module (2).
scientia non olet · About LEMON Manuals