LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 938 (Seat System) >> Repair Instructions >> Seat Back Replacement - Front (Bench Seat) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to SEAT REPLACEMENT - Bucket  or SEAT REPLACEMENT - Bench .
  2. Remove the recliner assembly. Refer to SEAT BACK RECLINER REPLACEMENT - Front .
  3. Remove the seat back pivot bolt.
  4. Remove the seat back from the lower frame.
    Fig 1: Removing Seat Back From Lower Frame
    G01478015Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals