Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the screws that retain the front trim molding to the door.
Remove the trim molding from the door.
Use the J 38778 in order to remove the rear trim moldings.
Remove the retainers from the rear trim molding.

Fig 1: Removing Front/Rear Trim Molding From Door
Courtesy of GENERAL MOTORS CORP.