LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 935 (Bumper System) >> Repair Instructions >> Step Pad Replacement - Rear Bumper (Pickup) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the step pads to the bumper.
  2. Press firmly until step pads lock into position.
    Fig 1: Installing Step Pads To Bumper
    G01477513Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals