LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 935 (Bumper System) >> Repair Instructions >> Fascia Replacement - Rear Bumper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the license lamps. Refer to BUMPER EXTENSION REPLACEMENT - REAR  in Lighting Systems.
  2. Remove all of the step pads from the bumper.
  3. Remove the clips securing the fascia at the bottom of the impact bar.
  4. Remove the fascia.
    Fig 1: Removing Clips Securing Fascia At Bottom Of Impact Bar
    G01477505Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals