LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 935 (Bumper System) >> Repair Instructions >> Fascia Replacement - Front Bumper (GMC) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the grille. Refer to GRILLE REPLACEMENT (GMC) or GRILLE REPLACEMENT (CHEVROLET) in Exterior Trim.
  2. Remove the push-pin retainers attaching the fascia to the front bumper.
  3. Remove the front bumper fascia from the vehicle.
    Fig 1: Removing Front Bumper Fascia From Vehicle
    G01477489Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals