Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to GLASS & SHEET METAL HANDLING CAUTION
in Cautions and Notices.
Important: The window reveal molding fills the cavity between the body and window. If the reveal molding is stretched or damaged, it cannot be reused and it must be replaced.
- Lift up on the loose area of the reveal molding.
- Clean the top edge of the window surface and the reveal molding with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint-free cloth.
- If the reveal molding cannot be reused, refer to URETHANE ADHESIVE INSTALLATION OF STATIONARY WINDOWS .