Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Use a flat-bladed tool in order to remove the wire cover (if equipped).
Disconnect the electrical connector (if equipped).

Fig 1: Disconnecting Rearview Mirror Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Insert a small, flat-bladed tool into the slot from the bottom.
Press slightly in order to release the tab.
Slide the mirror off of the support.

Fig 2: Removing Rearview Mirror From Support
Courtesy of GENERAL MOTORS CORP.