LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 934 (Stationary Window System) >> Repair Instructions >> Body Side Stationary Window Replacement (Utility) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. For the 2-door utility only, install a stationary window into the opening. Refer to URETHANE ADHESIVE INSTALLATION OF STATIONARY WINDOWS  .
  2. For the 2-door utility only, install 2 new rivets in order to secure the glass assembly to the sheet metal.
  3. Install 2 new rivets in order to secure the glass assembly to the sheet metal.
  4. For the 2-door utility only, install the rear seat belt anchor bolt to the roof.
  5. Install the body side trim panels. Refer to TRIM PANEL REPLACEMENT - BODY SIDE (STANDARD CAB PICKUP) or TRIM PANEL REPLACEMENT - BODY SIDE (EXTENDED CAB PICKUP) or TRIM PANEL REPLACEMENT - BODY SIDE (2-DOOR UTILITY) or TRIM PANEL REPLACEMENT - BODY SIDE (4-DOOR UTILITY) or TRIM PANEL REPLACEMENT - BODY SIDE (CREW CAB) in Interior Trim.
  6. Remove the double layer of masking tape around the perimeter of the painted surfaces and interior trim.
scientia non olet · About LEMON Manuals