LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 933 (Exterior Trim) >> Repair Instructions >> Applique Replacement -Quarter Panel Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Remove the pushpins.
  3. Remove the molding from the vehicle.
    Fig 1: Removing Molding From Vehicle
    G01477390Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals