LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 930 (Theft Deterrent System) >> Description and Operation >> Content Theft Deterrent (CTD) Description and Operation >> Ignition Switch Disarm Function

Ignition Switch Disarm Function

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Perform the following steps in order to verify that the ignition disarm function operates:

  1. Stay in the vehicle.
  2. Place the system in the armed state.
  3. Wait for the SECURITY telltale to turn off. The system is armed when the SECURITY telltale turns off.
  4. Cycle the ignition switch from the LOCK position to the RUN position. Return the ignition switch to the LOCK position.
  5. Open any door.

The system does not enter the alarm mode. The SECURITY telltale flashes. The flashing telltale indicates that the system has entered the ready-to-arm state.

scientia non olet · About LEMON Manuals