LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 928 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Console Replacement - Front Floor (Non-Full Length) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use care when installing the console so the clips do not bend.
  2. Install the console to the floor.
  3. For manual transmission only, install the shift lever. Refer to CONTROL LEVER AND/OR BOOT REPLACEMENT in Manual Transmission - NV 1500 or to CONTROL LEVER AND/OR BOOT REPLACEMENT in Manual Transmission - NV 3500.
    Fig 1: Installing Console To Floor
    G01476673Courtesy of GENERAL MOTORS CORP.