LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 924 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement (Utility - Endgate Window) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws that retain the high mount stop lamp to the endgate window.
  2. Remove the high mount stop lamp from the vehicle.
  3. Pull the rubber grommet from the body at the top of the endgate opening in order to remove the electrical connector.

    Pull the electrical connector through the hole in the body and disconnect.

    Fig 1: Removing High Mount Stop Lamp From Vehicle
    G01476333Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals