Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

On utility vehicles, 2 different lamps are used.

One type of dome lamp is incorporated into the overhead console while the other is mounted separately on the headliner.

Remove the lamp lens assembly using a small screw driver.

Fig 1: Removing Lamp Lens Assembly Using Small Screw Driver
Courtesy of GENERAL MOTORS CORP.
Remove the dome lamp assembly from the headliner.

Fig 2: Removing Dome Lamp Assembly From Headliner
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connector.
Remove the bulb.

Fig 3: Disconnecting Electrical Connector
Courtesy of GENERAL MOTORS CORP.