LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 922 (Wiring Systems (General Information)) >> Diagnostic Information and Procedures >> Using Fused Jumper Wires >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

J 36169-A  Fused Jumper Wire

Important:  A fused jumper may not protect solid state components from being damaged.

The J 36169-A  includes small clamp connectors that provide adaptation to most connectors without damage. This fused jumper wire is supplied with a 20- A fuse which may not be suitable for some circuits. Do not use a fuse with a higher rating than the fuse that protects the circuit being tested.

scientia non olet · About LEMON Manuals