LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 916 (Front Suspension System) >> Repair Instructions >> Upper Control Arm Bushings Replacement (4WD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper control arm. Refer to UPPER CONTROL ARM REPLACEMENT (RWD)  or UPPER CONTROL ARM REPLACEMENT (4WD) .
  2. Install the upper control arm in a vise.
  3. Remove the upper control arm bushings using J 21474-01  .
    Fig 1: Upper Control Arm Bushings
    G01467692Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals